Uniphos Fumisense Pro PH3-Hi Fumigation Phosphine Gas Monitor

Check with seller
Business, Industrial & Agriculture
1 year
Pakistan
Sindh
75500 - S-1, 24-C, Sunset Lane No.1, Phase II (ext) DHA
43 views
ID: 18686
Published 1 year ago by Shahzeb
Check with seller
S-1, 24-C, Sunset Lane No.1, Phase II (ext) DHA, 75500 Karachi, Sindh, Pakistan
Get directions →
43 item views
FumiSense Pro–Hi is a handheld phosphine gas monitor for monitoring fumigation levels inside the fumigated stack/ silo/ ship to ensure the desired level of PH3 is present inside. Equipped with an inbuilt air sampling pump capable of drawing a sample from a distance of 30m and a sensor capable of measuring PH3 up to 2000 ppm, it is the perfect tool for this application. The backlit OLED display enables the user to read the instrument display even in the dark. With user settable data-logging features, the device logs gas concentration values with date, time and location.

Features;
Range: 0 – 2000 ppm
Resolution: 1 ppm
20×4 OLED display & inbuilt air sampling pump; can draw sample from 30m
Continuous as well as Batch sampling provision
Data logging facility with information like Gas_conc., Warehouse no., Silo no., Date & Time.
USB interface
GUI for data downloading sorting & report generation
Soft power start – to avoid accidental ON/OFF

Specification
Gas Name: Phosphine
Range: 0-2000 ppm
Resolution: 1 ppm
Sensors:  Electrochemical sensor
Accuracy:  Inherently +/- 2% FS (but also depends on the calibration gas & method)
Drift:  less than 2% of the signal per month at constant temperature and pressure.
Sampling modes:  Draws Gas sample on continuous basis. Pump remains ON till SET key is pressed to stop sampling.
Alarm set point:  One user settable alarm set point (for low range detectors)
Data Storage:  Provision to store test records with gas conc. and alarm set points along with date and time.
Power source:  7.4V mAh Li-ion rechargeable battery pack
Inbuilt Pump Flow Rate:  400 to 800 ml/min
Power:  3.5V DC, 60 mA
Runtime:  About 6 – 8 hours
Data Transfer:  USB communication for data transfer from instrument to computer
Function keys:  UP, DOWN, SET & ENTER
Operating temperature:  -0 °C to 40 °C
Display:  Large 20 x 4 Alphanumeric OLED
Instrument Enclosure:  High Impact ABS
Size:  Height = 205 mm Depth = 38 mm Width1 = 108 mm Width2 = 65 mm
Weight:  500 g
Accessories:  Dust filter, battery charger, data downloading cable and outlet coupler. Read more

Published on 2023/04/27

Description

FumiSense Pro–Hi is a handheld phosphine gas monitor for monitoring fumigation levels inside the fumigated stack/ silo/ ship to ensure the desired level of PH3 is present inside. Equipped with an inbuilt air sampling pump capable of drawing a sample from a distance of 30m and a sensor capable of measuring PH3 up to 2000 ppm, it is the perfect tool for this application. The backlit OLED display enables the user to read the instrument display even in the dark. With user settable data-logging features, the device logs gas concentration values with date, time and location.

Features;
Range: 0 – 2000 ppm
Resolution: 1 ppm
20×4 OLED display & inbuilt air sampling pump; can draw sample from 30m
Continuous as well as Batch sampling provision
Data logging facility with information like Gas_conc., Warehouse no., Silo no., Date & Time.
USB interface
GUI for data downloading sorting & report generation
Soft power start – to avoid accidental ON/OFF

Specification
Gas Name: Phosphine
Range: 0-2000 ppm
Resolution: 1 ppm
Sensors:  Electrochemical sensor
Accuracy:  Inherently +/- 2% FS (but also depends on the calibration gas & method)
Drift:  less than 2% of the signal per month at constant temperature and pressure.
Sampling modes:  Draws Gas sample on continuous basis. Pump remains ON till SET key is pressed to stop sampling.
Alarm set point:  One user settable alarm set point (for low range detectors)
Data Storage:  Provision to store test records with gas conc. and alarm set points along with date and time.
Power source:  7.4V mAh Li-ion rechargeable battery pack
Inbuilt Pump Flow Rate:  400 to 800 ml/min
Power:  3.5V DC, 60 mA
Runtime:  About 6 – 8 hours
Data Transfer:  USB communication for data transfer from instrument to computer
Function keys:  UP, DOWN, SET & ENTER
Operating temperature:  -0 °C to 40 °C
Display:  Large 20 x 4 Alphanumeric OLED
Instrument Enclosure:  High Impact ABS
Size:  Height = 205 mm Depth = 38 mm Width1 = 108 mm Width2 = 65 mm
Weight:  500 g
Accessories:  Dust filter, battery charger, data downloading cable and outlet coupler.

Meet the seller

Shahzeb
S-1, 24-C, Sunset Lane No.1, Phase II (ext) DHA, 75500, DHA, Karachi, Sindh, Pakistan
56 active listings
Company
Last online 1 month ago
Registered for 2 years

Comments (0)

No comments has been added yet
Add comment
Call Sms Send message
Are you a professional seller? Create an account